To order a part, please send a cheque for the appropriate amount. Please make the cheque payable to "Gordon-Smith Guitars", address: Gordon-Smith Guitars, 9 Manchester Road, Partington, Manchester, M31 4FB. If you have any queries about spare parts, please call us on 0161 777 6871 or 0161 777 9438. Or email us at:
gordonsmithguitars@googlemail.com.
GSG Standard Replacement PartsShould you require any replacement parts. Here is the list of GSG parts which are normally available from stock. Other manufacturers parts may be available on request and a list of these parts can also be found on this page. All prices are carriage paid.
| Single Coil Pickup | £53.00 |
| Humbucker Pickup | £66.45 |
| P90 pickup | £98.50 |
| Humbucker mounting ring | £2.13 |
| Wrapover Bar Bridge | £17.25 |
| GSG Adjustable Bridge | £49.31 |
| Tunamatic Bridge | £16.99 |
| Posts for Bridge (complete with inserts) | £4.50(pair) |
| Saddles for Adjustable Bridge (Set) | £12.93 |
| Machine heads (Set) | £37.83 |
| Tremolo Unit | £81.82 |
| Control Pot | £4.33 |
| Switched Control Pot | £7.19 |
| 3 Way Toggle Switch | £6.62 |
| Control Knobs | £1.99 |
| Jack Socket | £2.60 |
| Jack plate | £2.00 |
| Endpins | £0.95 each |
| Blank Nut (Brass). *Can only be supplied uncut.* | £7.85 |
| GS1 Scratch Plate. ** See Note. | £ N/A |
| GS2 Scratch Plate. ** See Note. | £ N/A |
| Trem Arm (only) | £12.95 |
| Trapeze Tailpiece (Galaxy) | £33.00 |
| GS1 Wiring loom | £24.62 |
| GS2 Wiring loom | £37.24 |
| Dot Markers (Set of 10 - mother of pearl). | £2.60 |
** As all our guitars are hand built, the scratchplates are hand made to fit at the same time. Therefore, although the dimensions will only be fractionally different, it is not possible for us to make a scratchplate which will be guaranteed to fit. However most good guitar shops will sell material that you can mark out and cut to fit yourself.
Non GSG PartsHere are a few examples of other manufacturers parts which are available. (Others may be available on request).
| Kent Armstrong P90 pickup | £67.95 |
| Seymour Duncan JB Model | £79.95 |
| Seymour Duncan Invader Model | £89.95 |
| Seymour Duncan Seth Lover Model | £114.95 - £135.95 |
| Seymour Duncan Jazz Model | £79.95 |
| EMG 81 pickup | £89.99 |
| EMG ’Zakk Wylde’ | £184.99 |
If you have parts of your own that you would like us to fit, or you would like us to source and fit any other manufacturers parts for you we will under most circumstances be more than happy to oblige.
Discount for GSG parts not usedWe will of course allow a discount which will be equivalent to the retail cost of the GSG part not used, less a charge for work involved in fitting the non GSG part.
If we are asked to supply other manufacturers parts, the price of the other manufacturers part will be added on. Then this discount will be deducted from that price . Two examples are as follows:
1. GS-1 Natural: £394.00. Less discount if customer supplies Humbucker ( - £47.60 ) = Total of £346.40.
2. GS-1 Natural: £394.00. Plus Seymour Duncan JB pickup supplied by GSG or retailer ( + £79.95 ) = £473.95, less discount ( - £47.60 ) = Total of £426.35.
See lists below for the discounts allowed for fitting.
| Single Coil Pickup | £32.51 |
| Humbucker Pickup | £47.60 |
| Wrapover Bar Bridge | £9.56 |
| Fully Adjustable Bridge | £34.42 |
| Machine heads (Set) | £28.69 |
| Tremolo Unit | £N/A |
| Control Pot | £N/A |
| Switched Control Pot | £N/A |
| 3 Way Toggle Switch | £3.82 |
| Control Knobs | £1.00 |
| Jack Socket | £N/A |
| Jack plate | £0.70 |
| Endpins | £0.50 |
| Tunamatic Bridge | £9.56 |
| Trem Arm (only) | £N/A |
| Pins for Bridge (each) | £N/A |
| Saddles for Bridge (Set) | £N/A |
| Chrome Humbucker Covers | £N/A |
| Trapeze Tailpiece (Galaxy) | £N/A |
